AS 316Ti Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | 316Ti | AS | Australia |
Chemical composition % of the ladle analysis of grade 316Ti
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | N(%) | Ti(%) |
|---|---|---|---|---|---|---|---|---|---|
| 0.OS | 0.75 | 2 | 0.045 | 0.03 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | Max 0.10 | 5XC (C+N)Max 0.70 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 117 (≥) | 831 (≥) | 12 | 44 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 414 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 246 (≥) | 175 (≥) | 14 | 42 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 141 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 678 | 255 | 695 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 316Ti | AS | Australia | Chemical compositions of SAE wrought stainless steels |
| A 167 Type 316Ti | AS | Australia | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
| A 182 F 316Ti | AS | Australia | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| A 213 TP316Ti | AS | Australia | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| A 240 Type 316Ti | AS | Australia | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 276 316Ti | AS | Australia | Stainless Steel Bars and Shapes |
| A 312 TP316Ti | AS | Australia | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| A 314 316Ti | AS | Australia | Stainless Steel Billets and Bars for Forging |
| A 368 Type 316Ti | AS | Australia | Stainless Steel Wire Strand |
| A 478 Type 316Ti | AS | Australia | Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
| A 479 316Ti | AS | Australia | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| A 959 Type 316Ti | AS | Australia | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| SA-182 F 316Ti | AS | Australia | Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| SA-213 316Ti | AS | Australia | Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| SA-276 316Ti | AS | Australia | Specification for Stainless Steel Bars and Shapes |
| SA-479 Type 316Ti | AS | Australia | Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| SUS316Ti | AS | Australia | Specification for stainless steel bars |
| SA-312 S31635 | AS | Australia | Specification for Seamless and Welded Austenitic Stainless Steel Pipes |
| SA-240 S31635 | AS | Australia | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| S31635 | AS | Australia | Austenitic Chromium Nickel Molybdenum Stainless Steel (Titanium Stabilized) |