CSN 05 5380 Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | 05 5380 | CSN | Czech Republic |
Chemical composition % of the ladle analysis of grade 05 5380
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | N(%) |
|---|---|---|---|---|---|---|---|---|
| 0.08-0.15 | 0.07-0.30 | 0.80-1.20 | 0.027 | 0.027 | 0.80-1.20 | Max 0.15· | 0.45-0.65 | 0.15 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 496 (≥) | 983 (≥) | 32 | 21 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 144 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 391 (≥) | 159 (≥) | 32 | 21 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 341 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 217 | 964 | 191 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| F10005 | CSN | Czech Republic | Used in the products of the automobile, truck, tractor, and allied industries; small cylinder blocks, cylinder heads, air cooled cylinders, pistons, clutch plates, oil pump bodies, transmission cases, gear boxes, clutch housings, and light-duty brake drum |
| T72305 | CSN | Czech Republic | Carbon tool steel |
| 205 | CSN | Czech Republic | Stainless steel and heat resistant steel |
| ASTM 205 | CSN | Czech Republic | Stainless steel and heat resistant steel |
| S20501 | CSN | Czech Republic | Stainless steel and heat resistant steel |
| 305 | CSN | Czech Republic | Stainless steel and heat resistant steel |
| A 167 Type 305 | CSN | Czech Republic | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
| A 240 Type 305 | CSN | Czech Republic | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 249 TP305 | CSN | Czech Republic | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| A 276 305 | CSN | Czech Republic | Stainless Steel Bars and Shapes |
| A 313 Type 305 | CSN | Czech Republic | Stainless Steel Spring Wire |
| A 314 305 | CSN | Czech Republic | Stainless Steel Billets and Bars for Forging |
| A 368 Type 305 | CSN | Czech Republic | Stainless Steel Wire Strand |
| A 473 305 | CSN | Czech Republic | Stainless Steel Forgings |
| A 478 Type 305 | CSN | Czech Republic | Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
| A 492 Type 305 | CSN | Czech Republic | Stainless Steel Rope Wire |
| A 493 Type 305 | CSN | Czech Republic | Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
| A 511 MT305 | CSN | Czech Republic | Seamless Stainless Steel Mechanical Tubing |
| A 554 MT 305 | CSN | Czech Republic | Welded Stainless Steel Mechanical Tubing |
| A 580 Type 305 | CSN | Czech Republic | Stainless Steel Wire |
