Stellite 30 Enquiry | Print this page
| Category | Type | Steel grade | 
|---|---|---|
| Grades | Special Alloy | Stellite 30 | 
Chemical composition % of the ladle analysis of grade Stellite 30
| C(%) | Si(%) | Mn(%) | Cr(%) | Ni(%) | Mo(%) | Co(%) | Other(%) | 
|---|---|---|---|---|---|---|---|
| 0.45 | 0.6 | 0.6 | 26.0 | 15.0 | 6.0 | remaining | Fe:1.0 | 
| Proof strength Rp0.2 (MPa)  | 
                      Tensile strength Rm (MPa)  | 
                      Impact energy KV (J)  | 
                      Elongation at fracture A (%)  | 
                      Reduction in cross section on fracture Z (%)  | 
                      As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 432 (≥) | 768 (≥) | 21 | 31 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 224 | 
| Property | Density kg/dm3  | 
                      Temperature T °C/F  | 
                      Specific heat J / kgK  | 
                      Thermal conductivity W/mK  | 
                      Electric resistance µΩ·cm  | 
                      Modulus of elasticity kN/mm2  | 
                      Expansion rate | 
|---|---|---|---|---|---|---|---|
| 676 (≥) | 487 (≥) | 13 | 31 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 334 | |
| Temp. °C/°F  | 
                      Creep strain limit (10000h) (Rp1,0) N/mm2  | 
                      Creep rupture strength (10000h) (Rp1,0) N/mm2  | 
                      |||||
| 261 | 533 | 628 | 
| Product type | Products | Dimension | Processes | Deliver Status | 
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting | 
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, | 
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting | 
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED | 
| Grade | Standard | Country | Application | 
|---|---|---|---|
| Stellite 8 | Stellite alloy  | 
                  ||
| Stellite 12 | Stellite alloy  | 
                  ||
| Stellite 12P | Stellite alloy  | 
                  ||
| Stellite 19 | Stellite alloy  | 
                  ||
| Stellite 20 | Stellite alloy  | 
                  ||
| Stellite 21 | Stellite alloy  | 
                  ||
| Stellite 23 | Stellite alloy  | 
                  ||
| Stellite 25 | Stellite alloy  | 
                  ||
| Stellite 27 | Stellite alloy  | 
                  ||
| Stellite 30 | Stellite alloy  | 
                  ||
| Stellite 31 | Stellite alloy  | 
                  ||
| Stellite 98M2 | Stellite alloy  | 
                  ||
| Stellite 156 | Stellite alloy  | 
                  ||
| Stellite 157 | Stellite alloy  | 
                  ||
| Stellite 7 | Stellite alloy  | 
                  ||
| Stellite 6PM | Stellite alloy  | 
                  ||
| Stellite 6KC | Stellite alloy  | 
                  ||
| Stellite 6 | Stellite alloy  | 
                  ||
| Stellite 4 | Stellite alloy  | 
                  ||
| Stellite 3PM | Stellite alloy  | 
                  
Relevant products
- 
                    
                    
T30402/X155CrVMo121 Die Steel Sheet
 - 
                    
                    
GH3039 round bar
 - 
                    
                    
06Cr19Ni10/S30408/304/S30400/1.4301 Tube
 - 
                    
                    
S30409/304H/S30409/1.4948 Tube
 - 
                    
                    
S30403/304L/S30403/1.4307 Tube
 - 
                    
                    
S30453/304LN/1-4311 Tube
 - 
                    
                    
Air 9160C 30CD12 Round Bar
 - 
                    
                    
ESR AMS 5604 / 5622 / 5643 17-4PH/630 Block
 - 
                    
                    
UNS K30960 Bright Round Bar
 - 
                    
                    
403(UNS S40300) STAINLESS STEEL FLAT BAR
 - 
                    
                    
1.2581(H21, X30WCrV93, SKD5) Hot-Work Mould Steel
 - 
                    
                    
17-4PH Stainless Steel Seamless Tube
 - 
                    
                    
ASTM A269 TP304 U Bend Seamless Tube Pipe
 - 
                    
                    
1.4307/S30403/304L Stainless Steel Seamless Tube Pipe
 - 
                    
                    
403Cb Stainless Steel Forged QT Bar
 - 
                    
                    
D2(Cr12Mo1V1) Hot Rolled Plate
 
Stellite 30 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query | 
|---|---|---|---|---|---|---|
| 17-4PH Coil Stock | 0.08*200mm | Coil or Strip | Kgs | 1623 | Cold-Rolled+Annealed | Enquiry | 
| 17-4PH Round Bar | Φ5-300mm*L | Round Bar | Kgs | 46958 | Hot-Rolled+Annealed+black | Enquiry | 
| 17-4PH plate | 8-45*1200*3000mm | Plate or Sheet | Tons | 4.9 | Hot-Rolled+Annealed+black | Enquiry | 
| UNS K30960(VIM+ESR) Bright Round Bar | Dia.22mm | Round Bar | Kgs | 50 | Hot-Rolled+Annealed+black | Enquiry | 







