Stellite 25 Enquiry | Print this page
| Category | Type | Steel grade | 
|---|---|---|
| Grades | Special Alloy | Stellite 25 | 
Chemical composition % of the ladle analysis of grade Stellite 25
| C(%) | Si(%) | Mn(%) | S(%) | Cr(%) | Ni(%) | W(%) | Co(%) | Other(%) | 
|---|---|---|---|---|---|---|---|---|
| 0.1 | Max 1.0 | 1.5 | Max 0.03 | 20.0 | 10.0 | 15.0 | remaining | Fe:Max 3.0 | 
| Proof strength Rp0.2 (MPa)  | 
                      Tensile strength Rm (MPa)  | 
                      Impact energy KV (J)  | 
                      Elongation at fracture A (%)  | 
                      Reduction in cross section on fracture Z (%)  | 
                      As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 334 (≥) | 566 (≥) | 21 | 43 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 233 | 
| Property | Density kg/dm3  | 
                      Temperature T °C/F  | 
                      Specific heat J / kgK  | 
                      Thermal conductivity W/mK  | 
                      Electric resistance µΩ·cm  | 
                      Modulus of elasticity kN/mm2  | 
                      Expansion rate | 
|---|---|---|---|---|---|---|---|
| 482 (≥) | 856 (≥) | 32 | 21 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 332 | |
| Temp. °C/°F  | 
                      Creep strain limit (10000h) (Rp1,0) N/mm2  | 
                      Creep rupture strength (10000h) (Rp1,0) N/mm2  | 
                      |||||
| 712 | 799 | 854 | 
| Product type | Products | Dimension | Processes | Deliver Status | 
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting | 
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, | 
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting | 
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED | 
| Grade | Standard | Country | Application | 
|---|---|---|---|
| Stellite 8 | Stellite alloy  | 
                  ||
| Stellite 12 | Stellite alloy  | 
                  ||
| Stellite 12P | Stellite alloy  | 
                  ||
| Stellite 19 | Stellite alloy  | 
                  ||
| Stellite 20 | Stellite alloy  | 
                  ||
| Stellite 21 | Stellite alloy  | 
                  ||
| Stellite 23 | Stellite alloy  | 
                  ||
| Stellite 25 | Stellite alloy  | 
                  ||
| Stellite 27 | Stellite alloy  | 
                  ||
| Stellite 30 | Stellite alloy  | 
                  ||
| Stellite 31 | Stellite alloy  | 
                  ||
| Stellite 98M2 | Stellite alloy  | 
                  ||
| Stellite 156 | Stellite alloy  | 
                  ||
| Stellite 157 | Stellite alloy  | 
                  ||
| Stellite 7 | Stellite alloy  | 
                  ||
| Stellite 6PM | Stellite alloy  | 
                  ||
| Stellite 6KC | Stellite alloy  | 
                  ||
| Stellite 6 | Stellite alloy  | 
                  ||
| Stellite 4 | Stellite alloy  | 
                  ||
| Stellite 3PM | Stellite alloy  | 
                  
Relevant products
- 
                    
                    
1.4980 Round Bar
 - 
                    
                    
Inconel625 round bar
 - 
                    
                    
Incoloy825 round bar
 - 
                    
                    
NO8825 round bar
 - 
                    
                    
Inconel825 round bar
 - 
                    
                    
NO8020/No8031/N08367/NO8810/NO8825 Forging
 - 
                    
                    
Inconel 625 Bar
 - 
                    
                    
Air 9160C 25CD4S Round Bar
 - 
                    
                    
1.2581(H21, X30WCrV93, SKD5) Hot-Work Mould Steel
 - 
                    
                    
AISI E2512(SAE J1249) DIN 1.5681 Round bar
 - 
                    
                    
S32550 Stainless Steel Seamless Tube Pipe
 - 
                    
                    
S32750 Stainless Steel Seamless Tube Pipe
 - 
                    
                    
X105CrMo17 Extruded Pipe
 - 
                    
                    
BS 625 Strip Coil
 





