CNS CNS 316L Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | CNS 316L | CNS | China |
Chemical composition % of the ladle analysis of grade CNS 316L
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) |
|---|---|---|---|---|---|---|---|
| Max 0.03 | Max 1.00 | Max 2.00 | Max 0.045 | Max 0.030 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 524 (≥) | 235 (≥) | 14 | 11 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 134 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 347 (≥) | 573 (≥) | 41 | 13 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 433 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 882 | 157 | 123 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 316 | CNS | China | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| 316 | CNS | China | Austenitic Chromium Nickel Heat Resisting Steel |
| 316 | CNS | China | Austenitic Chromium Nickel Heat Resisting Steel |
| A 167 Type 316 | CNS | China | Stainless and heat resisting chromium-nickel steel plate, sheet and strip |
| A 182 F 316 | CNS | China | Forged low alloy and stainless steel piping components for use in pressure |
| 316 | CNS | China | Pipe, corrosion-resistant, stainless steel, seamless or welded |
| A 240 S31600 | CNS | China | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 249 S31600 | CNS | China | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| A 269 S31600 | CNS | China | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
| A 270 S31600 | CNS | China | Seamless and Welded Austenitic Stainless Steel Sanitary Tubing |
| A 276 S31600 | CNS | China | Stainless Steel Bars and Shapes |
| A 312 S31600 | CNS | China | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| A 313 S31600 | CNS | China | Stainless Steel Spring Wire |
| A 314 S31600 | CNS | China | Stainless Steel Billets and Bars for Forging |
| A 358 S31600 | CNS | China | Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
| A 368 S31600 | CNS | China | Stainless Steel Wire Strand |
| A 409 S31600 | CNS | China | Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
| A 473 S31600 | CNS | China | Stainless Steel Forgings |
| A 478 S31600 | CNS | China | Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
| A 492 S31600 | CNS | China | Stainless Steel Rope Wire |
