ISO ISO H3 Enquiry | Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | ISO H3 | ISO | ISO |
Chemical composition % of the ladle analysis of grade ISO H3
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Al(%) |
---|---|---|---|---|---|---|---|
Max 0.12 | 0.70-1.4 | Max 1.00 | Max 0.040 | Max 0.030 | 12.0-14.0 | Max 1.0 | 0.70-1.20 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
433 (≥) | 435 (≥) | 42 | 32 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 144 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
987 (≥) | 599 (≥) | 13 | 31 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 244 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
551 | 359 | 265 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
GH3030 | ISO | ISO | Classification and designation for superalloys and high temperature intermetallic materials |
GH3039 | ISO | ISO | Classification and designation for superalloys and high temperature intermetallic materials |
GH3044 | ISO | ISO | Classification and designation for superalloys and high temperature intermetallic materials |
GH3128 | ISO | ISO | Classification and designation for superalloys and high temperature intermetallic materials |
GH3170 | ISO | ISO | Iron-based superalloy |
GH3333 | ISO | ISO | Iron-based superalloy |
13X14H382ΦP | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
10X14Γ14H3 | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
11X13H3 | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
16X16H3MAД | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
18X13H3 | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
XH32T | ISO | ISO | Russia GOCT standard deformation of high temperature alloy grades and chemical composition |
XH35BT | ISO | ISO | Russia GOCT standard deformation of high temperature alloy grades and chemical composition |
XH35BTЮ | ISO | ISO | Russia GOCT standard deformation of high temperature alloy grades and chemical composition |
XH38BT | ISO | ISO | Russia GOCT standard deformation of high temperature alloy grades and chemical composition |
XH33TMДЮ(ЭK63,BHC-45) | ISO | ISO | Russia TY standard corrosion resistant alloy hot rolled and forged bars |
SUH31 | ISO | ISO | CNS standard heat resistant steel bar steel grade and chemical composition |
SUH35 | ISO | ISO | CNS standard heat resistant steel bar steel grade and chemical composition |
SUH36 | ISO | ISO | CNS standard heat resistant steel bar steel grade and chemical composition |
SUH37 | ISO | ISO | CNS standard heat resistant steel bar steel grade and chemical composition |