ISO ISO 17 Enquiry | Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | ISO 17 | ISO | ISO |
Chemical composition % of the ladle analysis of grade ISO 17
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | N(%) | Cu(%) |
---|---|---|---|---|---|---|---|---|
Max 0.120 | Max 1.00 | Max 2.00 | Max 0.06 | Max 0.15 | 17.0-19.0 | 8.00-10.0 | Max 0.11 | Max 1.00 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
664 (≥) | 444 (≥) | 21 | 41 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 232 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
483 (≥) | 927 (≥) | 31 | 33 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 344 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
845 | 678 | 312 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
1Cr17Ni7 | ISO | ISO | High strength after cold forming. Used in railway vehicle, conveyor belt, bolt and nut, etc |
1Cr17Mn6Ni5N | ISO | ISO | Nickel steel grade, instead of number 1 cr17ni7 and magnetism after cold working, used in railway vehicle, etc |
0Cr17Ni12Mo2 | ISO | ISO | Seamless stainless steel tubes for boiler and heat exchanger |
00Cr17Ni14Mo2 | ISO | ISO | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
X2CrNiMo18-14-3 | ISO | ISO | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
1.4435 | ISO | ISO | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
Z 3 CND 17-11-02 | ISO | ISO | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
TS 60 | ISO | ISO | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
0Cr17Ni12Mo2N | ISO | ISO | Seamless stainless steel tubes for boiler and heat exchanger |
00Cr17Ni13Mo2N | ISO | ISO | Seamless stainless steel tubes for boiler and heat exchanger |
1Cr17 | ISO | ISO | Seamless stainless steel tubes for boiler and heat exchanger |
Y1Cr17 | ISO | ISO | Stainless steel bars |
1Cr17Mo | ISO | ISO | Cold rolled stainless steel sheets and plates |
00Cr17 | ISO | ISO | Welded stainless steel pipes for liquid delivery |
00Cr17Mo | ISO | ISO | Cold rolled stainless steel sheets and plates |
1Cr17Ni2 | ISO | ISO | Stainless steel bars |
7Cr17 | ISO | ISO | Stainless steel bars |
8Cr17 | ISO | ISO | Stainless steel bars |
11Cr17 | ISO | ISO | Stainless steel bars |
Y11Cr17 | ISO | ISO | Stainless steel bars |
Relevant products
-
17-4ph steel wire
-
17-7PH / 631 COIL Strip Sheet
-
X40MnCr18 / 1.3817 Non magnetizable steels
-
ESR AMS 5604 / 5622 / 5643 17-4PH/630 Block
-
17-4PH(UNS S17400) AMS 5604 hot extruded tube pipe
-
17-7PH(631,UNS S17700,1.4541) AMS 5528 Stainless Steel Coil
-
17-4ph(S17400,630) Stainless Steel Sheet
-
Cold Rolled 1.4122 / X39CrMo17-1 Martensitic Stainless Steel sheet, strip, coil
-
17-4PH Stainless Steel Seamless Tube
-
X105CrMo17 Extruded Pipe
-
X5CrNiCuNb17-4-4 Rod
-
CSN 17102 Hot Coil
-
630 / 17-4ph ESR Steel for Equipment for making masks
ISO 17 Equivalent Grade Stock
Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
---|---|---|---|---|---|---|
17-4PH Coil Stock | 0.08*200mm | Coil or Strip | Kgs | 1623 | Cold-Rolled+Annealed | Enquiry |
17-4PH Round Bar | Φ5-300mm*L | Round Bar | Kgs | 46958 | Hot-Rolled+Annealed+black | Enquiry |
17-4PH plate | 8-45*1200*3000mm | Plate or Sheet | Tons | 4.9 | Hot-Rolled+Annealed+black | Enquiry |
17-7PH / 631 Coil & Strip, Sheet Stock | 0.3-3.0*10-180mm | Coil or Strip | Kgs | 1236.22 | Cold-Rolled+Annealed | Enquiry |