ISO ISO X12CrMnNiN17-7-5 Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | ISO X12CrMnNiN17-7-5 | ISO | ISO |
Chemical composition % of the ladle analysis of grade ISO X12CrMnNiN17-7-5
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | N(%) |
|---|---|---|---|---|---|---|---|
| Max 0.150 | Max 1.00 | 5.50-7.50 | Max 0.045 | Max 0.030 | 16.0-18.0 | 3.50-5.50 | 0.05-0.25 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 298 (≥) | 633 (≥) | 44 | 23 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 344 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 339 (≥) | 555 (≥) | 21 | 13 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 341 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 671 | 832 | 557 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X12CrMnNiN17-7-5 | ISO | ISO | Stainless steel strip for springs - Technical delivery conditions |
| 1.4372 | ISO | ISO | Stainless steel strip for springs - Technical delivery conditions |
| X12CrMnNiN17-7-5 | ISO | ISO | Stainless steels - Chemical composition |
| X12CrMnNiN17-7-5, 1.4372,AISI 201, 1H17N4G9 | ISO | ISO | X12CrMnNiN17-7-5, 1.4372,AISI 201, 1H17N4G9 is used for household appliances (pots, trays, sinks, washing machines, refrigerators), dairy equipment (tanks, vats, pasteurizers, centrifuges), brewery equipment (fermentation tanks, barrels), catering equipme |