UNS S45500 Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | S45500 | UNS | USA |
Chemical composition % of the ladle analysis of grade S45500
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | Cu(%) | Nb(%) | Ti(%) |
|---|---|---|---|---|---|---|---|---|---|---|
| 0.05 | 0.5 | 0.5 | Max 0.04 | Max 0.03 | 11.0-12.5 | 7.5-9.5 | 0.5 | 1.5-2.5 | 0.1-0.5 | 0.8-1.4 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 327 (≥) | 111 (≥) | 41 | 21 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 341 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 426 (≥) | 568 (≥) | 43 | 34 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 131 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 971 | 363 | 933 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 313 S45500 | UNS | USA | Stainless Steel Spring Wire |
| A 564 S45500 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 S45500 | UNS | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 S45500 | UNS | USA | Age-Hardening Stainless Steel Forgings |
| S45500 | UNS | USA | Stainless Steel (Custom 455) |
| SA-564 S45500 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| SA-693 S45500 | UNS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| SA-705 S45500 | UNS | USA | Specification for Age-Hardening Stainless Steel Forgings |
| A 313 S45500 | UNS | USA | Stainless Steel Spring Wire |
| A 564 S45500 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 S45500 | UNS | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 S45500 | UNS | USA | Age-Hardening Stainless Steel Forgings |
| S45500 | UNS | USA | Stainless Steel (Custom 455) |
| SA-564 S45500 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| SA-693 S45500 | UNS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| SA-705 S45500 | UNS | USA | Specification for Age-Hardening Stainless Steel Forgings |
| A 313 Type XM-16 | UNS | USA | Stainless Steel Spring Wire |
| A 564 XM-16 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 Type XM-16 | UNS | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 XM-16 | UNS | USA | Age-Hardening Stainless Steel Forgings |