UNS CA6NM Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | CA6NM | UNS | USA |
Chemical composition % of the ladle analysis of grade CA6NM
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) |
|---|---|---|---|---|---|---|---|
| 0.05 | 0.6 | 0.5-1.0 | Max 0.03 | Max 0.03 | 11.5-14.0 | 3.5-5.5 | 3.5-5.5 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 888 (≥) | 887 (≥) | 31 | 11 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 431 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 742 (≥) | 116 (≥) | 21 | 41 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 144 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 815 | 487 | 219 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 176 S41500 | UNS | USA | Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
| A 240 S41500 | UNS | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 268 S41500 | UNS | USA | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| A 276 S41500 | UNS | USA | Stainless Steel Bars and Shapes |
| A 473 S41500 | UNS | USA | Stainless Steel Forgings |
| A 479 S41500 | UNS | USA | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| A 815 CRS41500 | UNS | USA | Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
| A 815 WPS41500 | UNS | USA | Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
| A 959 S41500 | UNS | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| A 988 S41500 | UNS | USA | Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
| S41500 | UNS | USA | Chromium Nickel Molybdenum Martensitic Stainless Steel (F6NM) |
| SA-240 S41500 | UNS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| SA-268 S41500 | UNS | USA | Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| SA-276 S41500 | UNS | USA | Specification for Stainless Steel Bars and Shapes |
| SA-479 S41500 | UNS | USA | Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| SA-731 S41500 | UNS | USA | Seamless, Welded Ferritic, and Martensitic Stainless Steel Pipe |
| SA-815 CRS41500 | UNS | USA | Specification for Wrought Ferritic, Ferritic /Austenitic, and Martensitic Stainless Steel Piping Fittings |
| SA-815 WPS41500 | UNS | USA | Specification for Wrought Ferritic, Ferritic /Austenitic, and Martensitic Stainless Steel Piping Fittings |