ASTM XM-13 Enquiry | Print this page
| Category | Type | Steel grade | Country |
|---|---|---|---|
| Grades | Special Alloy | ASTM XM-13 | USA |
Chemical composition % of the ladle analysis of grade ASTM XM-13
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | N(%) | Al(%) |
|---|---|---|---|---|---|---|---|---|---|
| Max 0.05 | Max 0.10 | Max 0.20 | Max 0.01 | Max 0.008 | 12.25-13.5 | 7.50-8.50 | 2.00-2.50 | Max 0.01 | 0.90-1.35 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 855 (≥) | 697 (≥) | 32 | 31 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 423 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 671 (≥) | 484 (≥) | 31 | 34 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 322 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 589 | 217 | 727 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 564 S13800 | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
|
| A 693 S13800 | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
|
| A 705 S13800 | USA | Age-Hardening Stainless Steel Forgings |
|
| S13800 | USA | Precipitation Hardenable Chromium Nickel Aluminum Molybdenum Stainless Steel |
|
| SA-564 S13800 | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
|
| SA-693 S13800 | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
|
| SA-705 S13800 | USA | Specification for Age-Hardening Stainless Steel Forgings |
|
| A 564 XM-13 | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
|
| A 693 Type XM-13 | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
|
| A 705 XM-13 | USA | Age-Hardening Stainless Steel Forgings |
|
| A 959 Type XM-13 | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
|
| F 899 Type XM-13 | USA | Standard Specification for Wrought Stainless Steels for Surgical Instruments |
|
| SA-564 XM-13 | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
|
| SA-693 Type XM-13 | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
|
| SA-705 Type XM-13 | USA | Specification for Age-Hardening Stainless Steel Forgings |
|
| PH13-8Mo, 1.4534, Alloy 13-8 | USA | Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted |
|
| ASTMXM-13 | USA | ASTMXM-13 |
Relevant products
ASTM XM-13 Equivalent Grade Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| 15-5PH Forgrd Flat Bar | Select | 0 | Select | Enquiry | ||
| 0Cr13Ni8Mo2Al, PH13-8Mo, 13-8Mo, XM-13 round bar stock | Select | 0 | Select | Enquiry |