ASTM S5 Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | S5 | ASTM | USA |
Chemical composition % of the ladle analysis of grade S5
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Mo(％) | V(%) |
|---|---|---|---|---|---|---|---|
| 0.50～0.65 | 1.75～2.25 | 0.60～1.00 | ≤0.030 | ≤0.030 | 0.10～0.50 | 0.20～1.35 | 0.15～0.35 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 393 (≥) | 514 (≥) | 24 | 43 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 442 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 614 (≥) | 586 (≥) | 12 | 22 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 114 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 988 | 162 | 954 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 314 S50100 | ASTM | USA | Stainless Steel Billets and Bars for Forging |
| S50100 | ASTM | USA | Chromium Heat Resisting Steel |
| A 314 S50200 | ASTM | USA | Stainless Steel Billets and Bars for Forging |
| A 387 S50200 | ASTM | USA | Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum |
| S50200 | ASTM | USA | Chromium Heat Resisting Steel |
| S50300 | ASTM | USA | Chromium Heat Resisting Steel |
| S50400 | ASTM | USA | Stainless Steel |
| S32404 | ASTM | USA | Duplex (Austenitic-Ferritic) Chromium Nickel Molybdenum Copper Nitrogen Stainless Steel |
| 304S51 | ASTM | USA | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
| HFS 304S51 | ASTM | USA | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
| CFS 304S51 | ASTM | USA | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
| HFM 304S51 | ASTM | USA | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
| 316S51 | ASTM | USA | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
| CFS 316S51 | ASTM | USA | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
| HFM 316S51 | ASTM | USA | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
| HFS 316S51 | ASTM | USA | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
| 316S52 | ASTM | USA | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
| 321S51(1010) | ASTM | USA | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
| 321S51(1105) | ASTM | USA | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
| 347S51 | ASTM | USA | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |