HM Enquiry | Print this page
| Category | Type | Steel grade | Country |
|---|---|---|---|
| Grades | Special Alloy | HM | Sweden |
Chemical composition % of the ladle analysis of grade HM
| Co(%) |
|---|
| 7.5 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 817 (≥) | 128 (≥) | 13 | 34 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 223 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 864 (≥) | 276 (≥) | 34 | 32 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 122 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 122 | 357 | 674 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 213 N08925 | Sweden | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
|
| A 240 N08925 | Sweden | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
|
| A 276 N08925 | Sweden | Stainless Steel Bars and Shapes |
|
| A 312 N08925 | Sweden | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
|
| A 479 N08925 | Sweden | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
|
| B 625 N08925 | Sweden | UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip |
|
| B 649 N08925 | Sweden | Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire |
|
| B 673 N08925 | Sweden | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
|
| B 674 N08925 | Sweden | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube |
|
| B 677 N08925 | Sweden | UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube |
|
| N08925 | Sweden | Nickel Iron Chromium Molybdenum Copper Alloy |
|
| SB-625 N08925 | Sweden | UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip |
|
| SB-649 N08925 | Sweden | Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire |
|
| SB-673 N08925 | Sweden | Specification for UNS N08904, UNS N08925 and N08926 Welded Pipe |
|
| SB-674 N08925 | Sweden | Specification for UNS N08904, UNS N08925 and UNS N08926 Welded Tube |
|
| SB-677 N08925 | Sweden | UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube |
|
| 20X12BHMΦ | Sweden | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
|
| 15X12BHMΦ | Sweden | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |