ГОСТ Р2АМ9К5 Enquiry | Print this page
| Category | Type | Steel grade | Standard | Country | 
|---|---|---|---|---|
| Grades | Special Alloy | Р2АМ9К5 | ГОСТ | Russia | 
Chemical composition % of the ladle analysis of grade Р2АМ9К5
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) | N(%) | Cu(%) | Co(%) | Nb(%) | 
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00-1.10 | 0.20-0.50 | 0.20-0.50 | ≤0.030 | ≤0.030 | 4.70-5.20 | ≤0.60 | 8.00-9.00 | 1.70-2.10 | 1.50-2.00 | 0.05-0.10 | ≤0.25 | 4.70-5.20 | 0.05-0.10 | 
| Proof strength Rp0.2 (MPa)  | 
                      Tensile strength Rm (MPa)  | 
                      Impact energy KV (J)  | 
                      Elongation at fracture A (%)  | 
                      Reduction in cross section on fracture Z (%)  | 
                      As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 435 (≥) | 517 (≥) | 24 | 12 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 143 | 
| Property | Density kg/dm3  | 
                      Temperature T °C/F  | 
                      Specific heat J / kgK  | 
                      Thermal conductivity W/mK  | 
                      Electric resistance µΩ·cm  | 
                      Modulus of elasticity kN/mm2  | 
                      Expansion rate | 
|---|---|---|---|---|---|---|---|
| 767 (≥) | 625 (≥) | 21 | 42 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 112 | |
| Temp. °C/°F  | 
                      Creep strain limit (10000h) (Rp1,0) N/mm2  | 
                      Creep rupture strength (10000h) (Rp1,0) N/mm2  | 
                      |||||
| 389 | 224 | 158 | 
| Product type | Products | Dimension | Processes | Deliver Status | 
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting | 
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, | 
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting | 
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED | 
