ГОСТ 13Χ Enquiry | Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | 13Χ | ГОСТ | Russia |
Chemical composition % of the ladle analysis of grade 13Χ
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) | Cu(%) | Ti(%) |
---|---|---|---|---|---|---|---|---|---|---|---|
1.25-1.40 | 0.10-0.40 | 0.15-0.45 | ≤0.030 | ≤0.030 | 0.40-0.70 | ≤0.35 | ≤0.20 | ≤0.15 | ≤0.20 | ≤0.30 | ≤0.03 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
435 (≥) | 331 (≥) | 24 | 34 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 122 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
267 (≥) | 699 (≥) | 44 | 44 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 421 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
882 | 118 | 955 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
0Cr23Ni13 | ГОСТ | Russia | Corrosion resistance and heat resistance are better than 0cr19ni9 |
00Cr17Ni13Mo2N | ГОСТ | Russia | Seamless stainless steel tubes for boiler and heat exchanger |
0Cr19Ni13Mo3 | ГОСТ | Russia | Seamless stainless steel tubes for boiler and heat exchanger |
00Cr19Ni13Mo3 | ГОСТ | Russia | Seamless stainless steel tubes for boiler and heat exchanger |
0Cr18Ni13Si4 | ГОСТ | Russia | Seamless stainless steel tubes for boiler and heat exchanger |
1Cr13Mn9Ni4 | ГОСТ | Russia | 1Cr13Mn9Ni4 |
0Cr13Al | ГОСТ | Russia | Heat-resisting steel sheets and plates |
1Cr13 | ГОСТ | Russia | Heat-resisting steel sheets and plates |
0Cr13 | ГОСТ | Russia | Welded stainless steel tubes for machine structures |
Y1Cr13 | ГОСТ | Russia | Cold finished stainless steel bars |
1Cr13Mo | ГОСТ | Russia | Heat-resisting steel bars |
2Cr13 | ГОСТ | Russia | Heat-resisting steel bars |
3Cr13 | ГОСТ | Russia | Cold rolled stainless steel sheets and plates |
Y3Cr13 | ГОСТ | Russia | Cold finished stainless steel bars |
Y3Cr13 | ГОСТ | Russia | Cold finished stainless steel bars |
3Cr13Mo | ГОСТ | Russia | Stainless steel wire rods |
4Cr13 | ГОСТ | Russia | Cold rolled stainless steel sheets and plates |
2Cr23Ni13 | ГОСТ | Russia | Seamless stainless steel tubes for boiler and heat exchanger |
0Cr13A1 | ГОСТ | Russia | Cold rolled stainless steel and heat resisting steel strips |
1Cr19A13 | ГОСТ | Russia | Heat-resisting steel sheets and plates |
Relevant products
-
DT413 / 4Cr5MoSiV1MOD
-
X65Cr13 profile steel
-
IncoloyA-286 / GH 2132
-
X19CrMoVNbN11-1 / 1.4913 Disc Forging
-
N1310 High strength non-magnetic drill collar steel
-
H13(T20813) Tool Steel Flat Bar
-
1.2344(H13/X40CrMoV5-1/Z40CDV5) ESR HOT-WORK STEEL
-
403(UNS S40300) STAINLESS STEEL FLAT BAR
-
1.4120 / X20CrMo13 Stainless Steel Coil
-
X20CrMo13 / 1.4120 Martensitic Stainless Steel Strip, Coil Cold Rolled Annealed
-
1Cr11Ni2W2MoV,961,13Cr11Ni2W2MoV Forged Bars
-
X40MnCrN19/X40MnCrN19K/1.3813 Cold Drawn Steel Bars
-
Stainless Steel X65Cr13 Flat Bar
-
X65Cr13(1.4037) stainless steel strip coils
-
1.7336(13CrMoSi5-5) Plate Sheet
-
X10CrAlSi-13(1.4724) Seamless tube
-
PH13-8Mo Forgings
-
X12CrNiWTiB16-13, 1.4962 Flat Bar
-
0Cr13Ni8Mo2Al, PH13-8Mo, 13-8Mo, XM-13 round bar
-
X3CRNIMOAL13-8-2, 1.4534, PH13-8MO, UNS S13800
13Χ Equivalent Grade Stock
Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
---|---|---|---|---|---|---|
IncoloyA-286 / GH 2132 Stock | Φ8-65mm*L | Round Bar | Kgs | 489 | Hot-Rolled+Annealed+black | Enquiry |
H13 Tool Steel | 50x710xL | Flat or Square bar | PCS | 4 | Forged+Annealed+black | Enquiry |
1.2344(H13/X40CrMoV5-1/Z40CDV5) Stock List | Dia.182mm - Dia.510mm | Round Bar | Tons | 120 | Forged+Annealed+black | Enquiry |
15-5PH Forgrd Flat Bar | Select | 0 | Select | Enquiry | ||
PH13-8Mo Forgings | Select | 0 | Select | Enquiry | ||
1Cr11Ni2W2MoV,961,13Cr11Ni2W2MoV Sheet | Select | 0 | Select | Enquiry | ||
0Cr13Ni8Mo2Al, PH13-8Mo, 13-8Mo, XM-13 round bar stock | Select | 0 | Select | Enquiry |